By Israel Kaplan · Updated 2026-10-23
Short answer: Asphalt costs less up front. Interlock costs more, $28 to $40 per square foot installed in the GTA before HST, but it is repaired one paver at a time instead of patched or resurfaced. If the budget is tight, a paver border and apron on an existing asphalt driveway is the middle option.

Is interlock or asphalt cheaper for a driveway?
Asphalt is generally cheaper to install. We build interlock, so we will not quote you a number for asphalt. Get at least two asphalt quotes and compare them with an interlock estimate for the same square footage.
A full interlock driveway in the GTA runs $28 to $40 per square foot installed, before HST. An 800 sq ft (20 x 40 ft) driveway usually lands between $22,400 and $32,000. The cost guide breaks down what moves that number.
How do interlock and asphalt repairs compare?
This is the biggest practical difference. A paver driveway is thousands of individual units. If a section settles or a utility crew digs it up, the pavers are lifted, the base is fixed and the same pavers go back in. The repair blends in.
Asphalt is one continuous surface. Cracks are sealed or patched, and a patch usually shows as a different shade. When the surface is worn out, the usual fix is resurfacing or replacing it.
How do frost and road salt affect each one?
Ontario winters push every driveway through freeze-thaw cycles. What matters most is not the surface, it is the base. A paver driveway built on 10 to 12 inches of compacted 3/4 clear gravel, laid in 3-inch lifts, is designed to handle that movement. On clay soils we add woven geotextile fabric under the base.
Pavers also have joints that let the surface flex slightly instead of cracking across. Polymeric sand in the joints keeps them locked, and an edge restraint holds the whole field in place. Where failures happen, they almost always trace back to a thin or uncompacted base, which is why base depth is the first question to ask any contractor.
Can I keep my asphalt and add pavers?
Yes. A 12 to 18 inch paver border on each side, a paver apron at the garage and a matching front walk give you much of the look for a fraction of the cost. A typical two-car border package is $3,500 to $6,000.
For borders and aprons we saw-cut the asphalt and build the paver section beside it, and the asphalt stays. A full paver driveway is different. Asphalt cannot be the base, so it has to come out first, which adds roughly $3 per square foot for breakout and disposal.
Which one should I pick?
Choose asphalt if the lowest up-front cost matters most and you are comfortable with periodic sealing and patching. Choose interlock if you plan to stay in the house, want the driveway to be part of the home's look, and prefer repairs that do not show.
If you are not sure, ask for the free on-site estimate. We measure, check access and drainage, show you paver samples, and send a written quote within 48 hours. Our minimum project size is $2,500, and every installation comes with a 2-year workmanship warranty.
Prices: see our pricing page and our interlock driveways page.